Dynamic penetrometer DL10-DM30

product details »

Dynamic Penetrometer DPH50

HEAVY DYNAMIC PENETROMETER DPH – CLASSIFICATION ISSMFE1988 – UNI

You can execute:

dynamic penetration tests with blowback from 50 kg, 50 cm using sprint drills recovery or lose by 15 cm²; it is possible the use of anti-friction coatings side.
Polls percussion, with a special core barrel; you get a sample at a low degree of disturbancein the die of PVC (Ø 40 mm).

TECHNICAL

Tecnichal data sheet:  DPH50_P15

Group Motor and movement:

Motor unit, equipped with internal combustion engine, 4-stroke, 6.5HP power that allows both the movement of the instrumentation (using rubber tracks: 3-speed forward and reverse) that the operation of the same.

Blowback system:

Hydraulic hammer weighing 50 Kg, sprint to 50 cm, with sweep rate of 20/40 strokes / min, with base in steel treated with housing for the thrust rods (Ø 28x900 mm) and lateral friction coatings.

Guide column and hydraulic extractor:

Steel column, guiding structure for the execution of the penetrometer test, for the automatic increase of the impact mechanism, for the extraction of hydraulic rods, coatings and the core barrel.
When moving the steering column is placed on self-propelled.

DIMENSIONS AND WEIGHTS

  • Driving system:  Kg  18,0
  • Hammer: Kg  50,0
  • Rod Ø 28x900 mm:  Kg  4,35
  • Coatings  Ø 38x900 mm:  Kg    1,90

Total weight with standard equipment: 250Kg

WARNING WEIGHTS AND MEASURES TO CHANGE WITHOUT NOTICE

Transport systems crawler

OPTIONAL SUPPLIES

Sampler percussion

Sample in the die of PVC Ø 40 x 450 mm and Ø 60×450 for undisturbed samples up to a depth of about 5 / 6m

product details »

Dynamic penetrometer DPSH63-73

Super Heavy Dynamic Penetrometer DPSH63 - Classification ISSMFE 1988 - UNI

You can execute:

Dynamic penetration tests with blowback from 63.5 kg, 75 cm using sprint drills recovery or lose by 20 cm²; it is possible the use of anti-friction coatings side.

TECHNICAL

Tecnichal data sheet: DPSH63_P15

Group Motor and movement:
Motor unit, equipped with internal combustion engine, 4-stroke, 7/10HP power that allows both the movement of the instrumentation (using rubber tracks: 2-speed ) that the operation of the same.

Blowback system:

Hydraulic hammer weighing 63 Kg, sprint to 75 cm, with sweep rate of 20/40 strokes / min, with base in steel treated with housing for the thrust rods (Ø32x1000 mm) and lateral friction coatings.

Guide column and hydraulic extractor:

Steel column, guiding structure for the execution of the penetrometer test, for the automatic increase of the impact mechanism, for the extraction of hydraulic rods, coatings and the core barrel. When moving the steering column is placed on self-propelled.

DIMENSIONS AND WEIGHTS

  • Driving system:  Kg  18,0
  • Hammer: Kg  63,5
  • Rod Ø 328x900 mm:  Kg  6,35
  • Coatings  Ø 48x900 mm:  Kg    2,30

Total weight with standard equipment: 250Kg

WARNING WEIGHTS AND MEASURES TO CHANGE WITHOUT NOTICE

Transport systems crawler

OPTIONAL SUPPLIES

Sampler percussion

Polls percussion, with a special core barrel; you get a sample at a low degree of disturbance in the die of PVC .
Sample in the die of PVC Ø 40 x 450 mm and Ø 60x450 for undisturbed samples up to a depth of about 5 / 6m

product details »